TPI 2500/1875W 240/208V 120″ Baseboard Heater w/ Steel Element (Ivory) – H2925120S

“Made to Order – 1-4 Week Lead Time Depending on Availability”

The TPI 2500/1875W 240/208V 120″ Baseboard Heater with Steel Element (Ivory) H2925120S is made with an ivory-painted 22-gauge steel front for easy maintenance and high durability. It has 20-gauge junction boxes located on each end of the heater, which contains quick connect cable clamps and 6-inch ground lead wires for convenient protection and safety to the user as well.

With a 240/208-volt power source, this heater is able to deliver 2500/1875 watts and 10.4/9.0 amps. Meanwhile, its stainless steel heating element and aluminum fins allow for optimal heating performance. This convection heater also features a special over-temperature thermal limit that extends the entire length of the heated area.

This baseboard heater can easily be mounted on a wall using its key hole knockouts found every 4 inches at the back of the heater. It features a full length wireway provided along the back of the heater with an enclosed conduit available as an added accessory. Users also have to option to install an in-built thermostat field in the junction box for easy temperature management and control.

The TPI 2500/1875W 240/208V 120″ Baseboard Heater with Steel Element (Ivory) H2925120S is a product under the companys line of 2900S Series Electric Baseboard Stainless Steel Element Convection Heaters. Purchase this product from Engineer Warehouse, an authorized distributor.

PRODUCT HIGHLIGHTS:

• Stainless steel heating element and aluminum fins
• Ivory-painted 22-gauge steel front with 20-gauge junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6-inch ground lead wires
• Over-temperature thermal limit extends entire length of heated area
• A full length wireway provided along the back of the heater, enclosed conduit available
• Heater can be mounted to the wall by using the key hole knockouts every 4 inches at the back of the heater
• Optional in-built thermostats field installed in the junction box
• BTUs: 8532 / 6375
• Made in the USA
  

  Specifications

  Overall Dimensions	120 L x 6 W x 2.5 D
  Weight	22 lbs
  Color	Ivory
  Voltage	240/208 V
  Wattage	2500/1875 W
  Amps	10.4 / 9.0
  Quantity	1
  Manufacturer	TPI
  Model Number	H2925120S

  WARRANTY: Backed by TPI Limited Official Warranty. See Warranty Terms

  TPI Warranty

  TPI Corporation provides a limited warranty of materials and workmanship for a period of (i) ten (10) years for Baseboard Elements, (ii) two (2) years for Thermostats and Controls, and (iii) twelve (12) months for all other products, with the warranty period commencing on the original date of purchase. The TPI warranty is limited to materials manufactured and work performed by TPI Corporation, and does not include damage or failure caused by acts of God, abuse, misuse, connected to or placed on other than rated voltage, abnormal usage, faulty installation, failure to follow suggested maintenance procedures enclosed with the product, improper maintenance or any repairs other than those provided by an authorized TPI Corporation service center. During the warranty period, TPI Corporation will, at its sole option, repair or replace any defective parts or products returned, freight prepaid, to the TPI Corporation factory or such other location as TPI Corporation may designate. No parts or products will be accepted for repair or replacement without prior authorization from TPI Corporation and a return merchandise authority (RMA) number issued by TPI Corporation. Returned products must be packaged carefully and TPI Corporation shall not be responsible for damage in transit. When returning parts, the owner must provide the model number of the product and nature of difficulty being experienced. This warranty does not obligate TPI Corporation to bear the cost of labor in replacing any assembly, unit or component part thereof, nor does TPI Corporation assume any liability for secondary charges, expenses for installing or removal, freight or damages. There will be charges rendered for product repairs made after the warranty period has expired. Proof of purchase, including date, must accompany request for in-warranty service. This warranty gives you specific legal rights and you may have other rights, which may vary, from state to state.

  EXCEPT FOR THE LIMITED WARRANTY PROVIDED IN THE FOREGOING PARAGRAPH, ALL PARTS AND PRODUCTS SOLD BY TPI CORPORATION ARE SOLD ‘AS IS’, ‘WHERE IS’, AND WITHOUT ANY OTHER WARRANTY OF ANY KIND OR NATURE, WHETHER EXPRESS, IMPLIED, OR STATUTORY AND INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF SPECIFIC PERFORMANCE OR MERCHANTABILITY.

  UNDER NO CIRCUMSTANCES, EVEN WITH RESPECT TO CLAIMS COVERED BY THE FOREGOING WARRANTY, WILL TPI CORPORATION BE RESPONSIBLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE ARISING FROM OR RELATED TO THE PARTS OR PRODUCTS SOLD BY TPI CORPORATION.

  In any event, TPI Corporations maximum liability shall not in any case exceed the PURCHASE price for the PART OR product claimed to be defective.

  YOU HEREBY EXPRESSLY AGREE TO WAIVE ANY AND ALL RIGHTS TO A TRIAL BY JURY WITH RESPECT TO ANY PRODUCT MANUFACTURED OR SUPPLIED BY TPI CORPORATION.

  Compare Similar Carts

  Product	TPI 2500/1875W 240/208V 120″ Baseboard Heater w/ Steel Element (Ivory) – H2925120S	TPI 1750/1313W 277/240V 84″ Baseboard Heater w/ Steel Element (White) – G2917084SW	TPI 750W 208V 40″ Baseboard Heater w/ Steel Element (Ivory) – F2907040S	TPI 600/450W 277/240V 36″ Arch. Baseboard Heater w/ Steel Element (Brown) – G3706036B
  Brand	TPI	TPI	TPI	TPI
  Price	$135.99	$119.99	$71.99	$278.99
  Model Number	H2925120S	G2917084SW	F2907040S	G3706036B
  Overall Dimensions	120 L x 6 W x 2.5 D	84 L x 6 W x 2.5 D	40 L x 6 W x 2.5 D	36 L x 9 W x 4 D
  Voltage	240/208 V	277/240 V	208 V	277/240 V
  Wattage	2500/1875 W	1750/1313 W	750 W	600/450 W